Fast Ethernet 100Base SFP Transceiver With Digital Diagnostics
The TRPUFEEEXI000E1G SFP series of fiber optic transceivers provide a quick and reliable interface for 100BASE Fast Ethernet single mode applications. The transceivers are compliant with IEEE 802.3ah/D 3.3 standard. The diagnostic functions, alarm and warning features as described in the Multi-Source Agreement (MSA) document, SFF-8472 (Rev. 9.5), are provided via an I2C serial interface. All transceiver modules satisfy Class 1 Laser Safety requirements in accordance with the U.S. FDA/CD RH and international IEC-60825 standards.
The transceivers connect to standard 20-pad SFP connectors for hot plug capability. This allows the system designer to make configuration changes or maintenance by simply plugging in different types of transceivers without removing the power supply from the host system.
The transceivers have bail-type latches, which offer an easy and convenient way to release the modules. The latch is compliant with the SFP MSA.
The transmitter incorporates a highly reliable 1310nm laser and an integrated driver circuit. The receiver features a transimpedance amplifier IC optimized for high sensitivity and wide dynamic range. The transmitter and receiver DATA interfaces are AC-coupled internally. LV-TTL Transmitter Disable control input and Loss of Signal (LOS) output interfaces are also provided.
The transceivers operate from a single +3.3V power supply over three operating case temperature ranges of -40°C to +85°C , -5°C to +85°C or -5°C to +70°C The housing is made of metal for EMI immunity
- Compliant with IEEE 802.3ah/D3.3 (100BASE-LX10)
- Compatible with SFP MSA
- RoHS6/6 Compliant
- Digital Diagnostics through Serial Interface
- Internal Calibration for Digital Diagnostics
- 1310nm Fabry Perot Laser Transmitter
- Distances up to 40km
- Eye Safe (Class 1 Laser Safety)
- Duplex LC Optical Interface
- TX Fault & Loss of Signal Outputs
- TX Disable Input
- Single +3.3V Power Supply